Friedrich WCVT10B10A
through-the-wall air conditioner · 11,000 BTU cooling · fits ~550 sq ft
A through-the-wall AC rated 11,000 BTU — enough cooling for a room of roughly 550 square feet (the 20-BTU-per-square-foot rule).
Buy this unit
Sold on Amazon — DIY install
A through-the-wall AC is a self-install unit: you set it in the window (or wall sleeve), no contractor or refrigerant charge needed. We could not confirm a listing for this exact model number, so this opens an Amazon search for a Friedrich through-the-wall AC of this capacity — one we checked returns real results. Compare whatever you find against the certified specs above.
Sized for ~550 sq ft — measure your room and check your window type before you buy.
See matching units on Amazon →Affiliate link. We may earn a commission — it never changes your price or our specs. Opens a search, not a specific listing — we have not verified any individual result is this exact model.
The Verified Label — every certified spec
certified 2025-03-13
status: Active
Cooling & efficiency — source: ENERGY STAR / DOE
Fit & install — does it fit your window?
Efficiency & running cost — computed by Verified HVAC Data
Refrigerant & identity
Compare similar room ACs
Frequently asked questions
Is 11,000 BTU right for my room, or should I size up?
About 550 square feet is the guide figure, and 4 certified units sit on that shelf. The next shelf up is 12,000 BTU (91 units), about 600 sq ft. Below it, 10,000 BTU (81 units) covers about 500 sq ft. Between two shelves, take the smaller one: oversizing is the usual reason a unit cools but leaves the room clammy, which our sizing calculator explains.
Does the Friedrich WCVT10B10A need a wall sleeve?
Yes — through-the-wall units slide into a wall sleeve. This unit measures 27" wide, 15" tall and 21" deep and weighs about 90 lb. Check that your existing sleeve opening matches, or buy the maker's sleeve.
Sources. Certification and CEER from ENERGY STAR room-AC data and the DOE compliance certification database. Cooling capacity, dimensions and refrigerant are the manufacturer-certified values. Annual running cost, suggested room size and the percentile are computed by Verified HVAC Data from published ratings and EIA U.S. average electricity prices — see our methodology. Refrigerant GWP is the IPCC value. We publish no star ratings and take no payment for placement. "Not published" means the source registry doesn't disclose it — we never fill a spec with a guess.